- Product datasheet
Polymeric wetting and dispersing additive in water
TiloSperse 6465 is part of our range of polymeric dispersants designed for improving colour development and stability of high standard water-based coatings and inks. It can also be used for the production of pigment concentrates for general industrial aqueous coating systems.
TiloSperse 6465 has good performance in all pigment dispersions. All the dispersants in this series are compatible with a wide range of binders including acrylic, epoxy, polyurethane and alkyd binders.
TiloSperse 6465 features the following advantages:
- Increased pigment loading
- Excellent flow properties
- Good gloss
- Excellent colouristic properties
- No Flooding
- Improved rub out
- High stability in resin free pastes
- Water-based coatings
- Water-based (jet) inks
- Water-based Pigment pastes
Inorganic pigment: 20-30%
Titanium dioxide: 10-12%
Organic pigment: 30-75%
Carbon black: 130-150%
TiloSperse 6465 should be dissolved in the mill-base before addition of the pigments. For optimum performance, it is recommended that only pigment, TiloSperse 6465 and water be used for pigment grinds (resin-, amine- and co-solvent-free).
The product should be stored in a cool dry place. At temperatures below 0°C, turbidity and separation may occur. This does not influence product efficiency. For good processibility use at room temperature and mix well before use.
Shelf life in original unopened container: 2 years after production date.
Chemical & physical properties
|Composition||40% active polymeric dispersant in water|
|Appearance||Light yellow liquid|
|Flash point||Above 100°C|
|Acid value||8-12 mg KOH/g|
|Density||Approx 1.06 g/ml at 20°C|